Softlite Softboard Spare Fin

Description

Softlite Softboard Spare Fin

The Softlite Softboard Spare Fin gives you a replacement fin for your Softboard. This is just one fin. So, if you need to replace all the fins in your Thruster Softboard then you’ll need 3 of these fins. It’s great to have fin on hand in case you lose or damage a fin.

Constructed of plastic they reduce the risk of harm as they’re soft and have a lot of flex. If you hit an object they’ll bend so not damage you or your board. Boards with these fins are allowed to be used inside the flags, unlike boards with the hard fins that are considered dangerous to swimmers.

These fins will be a close match to those that come originally on a wide range of Softboards. A way to determine if these fins will fit your board is to check if there’s screw plugs on the top deck of your board where the fins are located. If yes, these fins should work.

In terms of dimensions, the distance between the fin holes is 95mm. Height of the fin from base is 120mm. The screw is about 54mm long. So this is a great fin to have on hand. In case of a mishap you can keep surfing. Check our full range of Surfboard Fins at Manly Surfboards>Surfboard Fins