Komunity Project X1 Tail Pad

Description

Komunity Project X1 Tail Pad

The Komunity Project X1 Tail Pad is a 3 piece pad with a slashing X design. 3 piece pads are one of the most functional and versatile as they cater for your narrow and wide tail boards. Placing the side pieces closer to the rails you get grip right where you toes should be when driving big bottom turns.

A raised arch of 6mm is in the middle of the pad. So you get plenty of support as you move your foot around.  The tail has a 20mm kick that you can jam and drive against. The kick is of hi-density EVA. So when you push against it you’ll get a bit of a boost, it won’t be too soft or squishy, your power directed into drive.

A semi-circle incut at the rear. So you can place this grip closer to the end of your board, around your leg rope plug. With the kick placed over your back fin you have the ideal point from which to drive your board. An elevated square pattern covers the pad. So, no matter what angle your foot is placed you get traction.

There’s plenty of holes on the outer pieces that provide great traction for your toes. These are especially good for your heel and toe surfing. This is where you move your foot the rail and push and weight over your toes so you can put your board on its rail. The pad backing uses 3M high quality adhesive. Check our range of Grips at Manly Surfboards>Surfboard Grip