FCS II Carver PC Tri Fin Set

Description

FCS II Carver PC Tri Fin Set

The FCS II Carver PC Tri Fin Set is part of the FCS Essentials range so its a fin you should have. The Carver is a taller fin with a pronounced sweep so you can charge down the line. Sweep indicates the fin’s backwards curve or slope. Along with the fuller tip this gives exceptional drive and control off the bottom and on the open face. This fin gives you want you need so you can perform best on point and reef break waves where waves are running fast. There’s a flat foil on the inside of the side fins so you get consistency and predictability. This is great for power surfers who push hard against their fins and draw out their turns.

PC, Performance Core, construction of the FCS II Carver fins means they’re lightweight. They have a foam core and strong glass outer. Able to handle a wide variety of conditions you’ll perform best with these fins in open face walling waves. This fin will also work best in your board with deep concave and extra rocker. Note, the FCS II Carver PC Thruster Set is for exclusive use with the FCS II Fin System so will not fit in the traditional FCS Dual Plug System. To find out more on how FCS can power your surfing check here: FCS Surf Advantage

Specs are as follows: Medium Base: 4.47″ / 113mm Depth: 4.54″ / 115mm Area: 14.96″ / 9650 mm Sweep: 37 Foil: Flat Large Base: 4.58″ / 116mm Depth: 4.66″ / 118mm

Area: 14.96″ / 10150 mm Sweep: 37 Foil: Flat