FCS II Accelerator PC Tri Fin Set

Description

FCS II Accelerator PC Tri Fin Set

The FCS II Accelerator PC Tri Fin Set blasts performance out of anything you surf in. These Thruster Fins are oversized. This means you get more fin than what you’d normally get comparative to your weight and size. The extra fin area equates to more drive and power. These FCS 2 Fins allow you to put more explosive power into your surfing. A balanced fin, you can attack all wave types. This means the width, depth, rake and tip flex of the FCS Accelerator Fins are right in the middle of the FCS range and so they go great in all wave types.

All these FCS 2 Fins features are balanced so the fin is predictable. Being larger when you go off the bottom you’ll drive harder as there’s more fin area pushing you. The same off the top and down the line. You get super confidence and power. There’s a flat foil on the inside of the FCS Accelerator Fins outer side so you get control and more predictability. This is great for power surfers so the harder you push the drivier you go. There’s no quirky over-flex or wash out.

High Speed

PC means the FCS II Accelerator PC Thruster Set has a fibreglass construction, Performance Core, so you get the feel of a traditional predictable fibreglass fin.  This fin is an all-rounder so you’ll get great performance from your entire shortboard quiver. Note, the FCS II Accelerator PC Carbon Tri Fin Set is for exclusive use with the FCS II Fin System so will not fit in the traditional FCS Dual Plug System. To find out more on how FCS can power your surfing check here: FCS Surf Advantage

Specs for the FCS Accelerator Fins are as follows:

Small Base: 4.28″ / 109mm Depth: 4.47″ / 113mm Area: 14.51″ / 9360mm Sweep: 33.7 Foil: Flat

Medium Base: 4.39″ / 111mm Depth: 4.58″ / 116mm Area: 15.28″ / 9860mm Sweep: 33.7 Foil: Flat

Large Base: 4.50″ / 114mm Depth: 4.70″ / 119mm Area: 16.06″ / 10360mm Sweep: 33.7 Foil: Flat